repeat">
Parag Steel Co.
Parag Steel Co.
Anand Parbat Indl. Area, New Delhi, Delhi
GST No. 07AJRPS7551G1ZL
Call 08048704346 93% Response Rate
Send E-mail

D-2 Die Steel

D-2 is an oil hardening, high Carbon/ Chromium type tool steel with very high wear resistance. It hardens with a very slight change in size. The alloy possesses very high compressive strength and is deep hardening.
Request CallBack
Die Steel D2
Get Best Quote

Die Steel D2

Approx. Price: Rs 250 / KilogramGet Latest Price
Product Details:
Minimum Order Quantity1 Kilogram
Usage/ApplicationAutomobile Industry
ShapeRound
Material GradeD2
Diameter20mm to 300mm
MaterialDie Steel D2
Size20mm to 300mm
Surface TypeGround Turned & Black
Surface ConditionGround
Die steel D2

Yes! I am Interested
Request CallBack
Die Steel D-2
Get Best Quote

Die Steel D-2

Approx. Price: Rs 220 / KgGet Latest Price
Product Details:
Single Piece Length6 meter
ApplicationAutomobile Industry
ShapeRound & Flat
Material GradeD-2
D2 Steel Properties D2 steel is an air hardening, high carbon, high-chromium tool steel. It has high wear and abrasion resistant properties. It is heat treatable and will offer a hardness in the range 55-62 HRC, and is machinable in the annealed condition. D2 steel shows little distortion on correct hardening. D2 steel???s high chromium content gives it mild corrosion resisting properties in the hardened condition. Typical applications for D2 Steel: Stamping or Forming Dies Punches Forming Rolls Knives, slitters, shear blades Tools Scrap choppers Tyre shredders

Yes! I am Interested
Request CallBack
D2 Die Steel
Get Best Quote

D2 Die Steel

Approx. Price: Rs 220 / KgGet Latest Price
Product Details:
Minimum Order Quantity1 Kg
ShapeFlat
Material GradeD-2
D2: A cold work tool steel D2 is a high chromium tool steel specifically designed to provide a high abrasive wear resistance and a high hardenability. The grade is delivered in annealed condition to keep a good machinability. After machining it requires a hardening to achieve its service properties. The adjustment of hardness should be done to get the best compromise between touhness and wear resistance. This grade can be used for cutting and deformation tools submitted to high abrasive wear. Main applications are stamping tools, punches and dies, forming dies, shear blades and cutters, ceramic molds, ....

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
HCHCR D2 Steel
Get Best Quote

HCHCR D2 Steel

Approx. Price: Rs 220 / KgGet Latest Price
Product Details:
Minimum Order Quantity1 Kg
Usage/ApplicationAutomobile Industry
ShapeRound
DiameterDia 6mm - 355mm
D2 Steel Properties D2 steel is an air hardening, high-carbon, high-chromium tool steel. It has high wear and abrasion resistant properties. It is heat treatable and will offer a hardness in the range 55-62 HRC, and is machinable in the annealed condition. D2 steel shows little distortion on correct hardening. D2 steel???s high chromium content gives it mild corrosion resisting properties in the hardened condition. Typical applications for D2 Steel: Stamping or Forming Dies Punches Forming Rolls Knives, slitters, shear blades Tools Scrap choppers Tyre shredders

Yes! I am Interested
Request CallBack

D2 Flat Die Steel

Approx. Price: Rs 250 / KgGet Latest Price
Product Details:
Minimum Order Quantity1 Kg
ShapeFlat Bar
Usage/ApplicationAutomobile Industry
Material GradeD2 Flat
D2 tool steel propertiesThis air-hardening, cold work formulation features very high concentrations of carbon and chromium (1.40 ??? 1.60% and 11.00 ??? 13.00%, respectively). It???s highly wear-resistant and the high concentration of chromium imparts mild corrosion resistance.D2 is less tough than S7 and A2 tool steels but features decent stability during heat treatment. D2 can reach an approximate tempered hardness range between 54 ??? 61 HRC and features an approximate compressive yield strength of around 275 ksi to around 319 ksi as hardness increases.

Get Best Quote
Yes! I am Interested

Explore more products

X